eldoLED L-Dot Pico driver module layout.
The company stresses that the L-Dot Pico is a breakthrough in LED drive, networking and control form factor. eldoLED technology drives up to 4 LED colour groups from a single, high-precision LED current source, which made the L-Dot Pico' Power efficiency of up to 95%.
The L-Dot pico supports a 15-bit control resolution per output channel for accurate dimming and fine colour mixing. The L-Dot Pico's high efficiency leads to a lower heat generation, which means a much smaller heat sink suffices to dissipate its heat. The Pico can even share the heat sink of the LED engine, lowering total system costs. further, it features an interface for the connection of an NTC, enabling various ways of thermal control, including LED throttling.
The remarkably small size of the L-Dot Pico makes it ideally suited for in-fixture installation, leading to less cabling, increased design freedom and improved system cost for luminaire manufacturers.
ShowMaster, the part of the freely available TOOLbox software, supported on all eldoLED driver/controllers, allows you to create, manage and upload show sequences for use in standalone mode. ShowMaster is part of the freely available TOOLbox software.
The L-Dot Pico Technical data including:
• Dimensions: 25mm/0.98†diameter, 4.5mm/0.18†height
• Operating supply voltage range: 12V – 28V DC
• Power output: up to 15Watt
• LED current: 350mA – 700mA
• Supported DMX network resolutions: 8- and 16-bit
• Set point resolution: up to 15-bit
• Contrast ratio: up to 8,000:1
• Onboard thermal sensor interface for connection of NTC
• Uploaded show sequences: 9 standard eldoLED shows, customer-defined shows, or ShowMaster
About eldoLED:
EldoLED develops, produces and markets high-performance, small form factor Drive, Networking and Control solutions for solid-state lighting applications. eldoLED standard products include DMX- and DALI-compatible drivers/controllers and accessories such as dimmers and bridge interface cards. Dedicated team of engineers supports eldoLED's customers by designing customized solutions (form factor, connectors, encapsulation) and design-in solutions.
A single-phase VFD, also known as a variable frequency drive, is a specialized electronic device used for precise control and regulation of single-phase motors. Unlike three-phase motors that are commonly used in industrial applications, single-phase motors are predominantly found in residential and small-scale applications.
The primary function of a single-phase VFD is to control the frequency and voltage supplied to the single-phase motor, thereby enabling accurate regulation of motor speed. By adjusting the frequency and voltage output, the VFD allows for smooth and precise control over the motor's rotational speed. This feature is particularly useful in applications where speed control is required, such as in residential HVAC systems, small-scale machinery, and household appliances.
Energy efficiency is a significant advantage offered by single-phase VFDs. By adjusting the motor speed to match the load requirements, the VFD reduces energy wastage and improves overall energy efficiency. When the motor operates at a lower speed during periods of low demand, energy consumption is significantly reduced, resulting in energy savings and lower operating costs.
Motor protection is another important aspect addressed by single-phase VFDs. They incorporate various protective features, including overload protection, short circuit detection, and thermal protection, which help safeguard the motor against damage due to excessive current, voltage fluctuations, or overheating. This ensures reliable motor operation, prolongs the motor's lifespan, and reduces the risk of unexpected failures.
Harmonic filtering is also a critical consideration in single-phase VFD applications. When single-phase VFDs operate, they can introduce harmonics into the power supply, which may cause issues such as voltage distortions and interference with other electrical equipment. To mitigate these problems, single-phase VFDs often incorporate harmonic filtering techniques to suppress harmonics and ensure a clean and stable power supply, maintaining power quality and preventing damage to connected equipment.
Control algorithms play a significant role in single-phase VFD operation. These algorithms allow for precise control and adjustment of motor speed, ensuring smooth acceleration, deceleration, and accurate speed regulation. Advanced control algorithms enable efficient motor operation and enhance overall system performance.
In summary, single-phase VFDs provide precise control and regulation of single-phase motors in residential and small-scale applications. With their energy efficiency, motor protection features, harmonic filtering capabilities, and advanced control algorithms, single-phase VFDs enhance motor performance, reduce energy consumption, and ensure reliable operation in various residential and small-scale applications.
Single Phase Vfd,220V Frequency Inverter,Ac Frequency Inverter,High Frequency Inverte
WuXi Spread Electrical Co.,LTD , https://www.vfdspread.com