Some time ago Aunt Zhang pushed the label printer, I thought I was a hobby of labels. How could a label printer look so worthwhile? So there will be this article. Because several people had previously sunk on the labeling machine, I didn't introduce too much about the machine itself. I only wrote some sea-rushing procedures and other domestic consumables and editing software addresses that other friends did not share before. A single comment saw everyone's need for these places.
This label printer is basically perfect - stickers, non-thermal, no ink cartridges, film cover, automatic paper cutting, battery-powered, etc., but does not support WiFi and NFC, plus these features are PT- P750W. However, the price has doubled, and I feel that I do not have a high demand for it. However, these two models do not support hand-held devices and can only be connected to a computer for printing.
This label printer did not catch up to the first wave. The second wave was also robbed of light because of the slowness of movement. So I still remember that on that afternoon I basically kept refreshing this product and finally I was stunned by the 33.9 knife. The direct shipment to China was 9.9 knives, but in the end I even saved the 9.9.
Because of the looting, the previous price interface was not intercepted. Just looking at the price curve, the machine is now almost the lowest price.
September 11 has been successfully placed orders.
I am prompted to receive it on September 29.
At the same time that I was successful, I went to X Bao to find domestic consumables. On September 12, I picked up an 18mm consumable, which was 8 meters long.
So wait ah, etc., Meiya has not shipped, I can't wait to take a lame English urging customer service.
So finally shipped to me on the 15th.
I thought at first that it was UPS or DHL, and the result was a quick delivery that I did not know.
Point tracking parcels and found that they are ready to board.
Find their official website, enter the waybill number, and see that they are ready to leave Hong Kong.
Waiting for the machine while consumables have been received, and don't ask me to purchase an address.
Endless waiting.
I signed up with Gmail. Just look at the email and I'll just click on the tracking package.
One day I finally received an e-mail to let me upload my ID card. It was around September 22 and it was a week away from the delivery on the 15th.
Tracking the parcel or the ghost look, I checked the official website, showing that it has arrived in China.
Still passed the identity card as required, and then did not move.
Waited for two days and came to the Tianjin Customs. Hey, I'm in Hefei. I should go to Shanghai Customs. I have a lot of puzzles. . .
No way, on the 29th (either Beijing time or US imperial time) has not yet received, so I decisively exchanged feelings with the customer service. Because at 8 o'clock on the 29th of the US imperial time is 8 o'clock in Beijing time, the next day will be put 11 leave, and customer service said to arrive on Tuesday or Wednesday, because we have to put on the Liberation Day holiday customer service Chat literally translated, so wait for a while.
Wait until October 3 when I went to harass customer service. Customer service is no way, said to be estimated to 10, and then is the constant silence, and finally broke out that said check the next logistics, it is estimated that lost the package, you can refund or replace the other. I said don’t, I need this. I’m not going to wait until I change. I still have to wait until the 10th. So the customer service also gave in, so to speak, not so long, I am also very sorry, so the freight 9.9 knife back to you! I sneaked in my heart and I didn't find any customer service. After thanking customer service, I patted my chest and told me that I was sure to be able to reach the 10th.
Waiting on the 10th really arrived, not from the logistics company, but from Amazon in China. .
The black seal tears open and it's not sticky.
Hold the blister package well.
Showing true capacity.
The following is the logistics of the stickers, my hand blocking my address Pinyin. In fact, our units often receive DHL's express delivery, are English addresses - Hefei High & New Technology Industrial Developmnet Zone, Hefei, Anhui province, China, I write is Pinyin.
This side of the logistics bar also has standard Chinese Amazon address stickers.
Take a photo with the order,
Unpack the box. The left side is the machine. The top is the manual and the like. The power adapter and data cable are on the upper right and the test ribbon is sent on the lower right.
All accessories.
Unpack the bag. The only thing I packed was the consumables I bought and I showed it back to you.
This is an observation window that other people did not introduce before, but because the reflection is seen on top of our office.
The integrated ribbon is like this.
You can see how much you use by loading the integrated ribbon.
This is a comparison chart of the color length and type of the integrated ribbon in the official material.
Because the official editing software and other contents need to input the serial number of the integrated ribbon placement position, so I downloaded the address after the end of the article, if necessary, a friend can download.
The previous drying orders may not have been introduced. In fact, switching editing software with simple editing is the Plite button on the top of the machine. When the button is on, there is no need to install a driver. Directly opening the removable storage device is the editing software. If you turn off that light, you need to go to the official website to download the driver and then use the official editing software to edit it. The editing content is more powerful.
The following is a comparison of official supplies and X-bao supplies.
Look at the above, in fact, my ribbon should use TZe241, in fact domestic supplies is TZ-241. Because I bought 18mm wide, the supplies are 24mm wide, so it looks like the two heights are different.
Positive contrast. On the left is the domestic consumables, the right is the consumables sent. The left consumables, although written in white, is actually displayed on the software in yellow.
The print effect, the blank area is a small section of the automatic paper cutting because the ribbon is a certain distance from the paper knife, and it will be cut out automatically every time, but it will not be produced if multiple prints are repeated.
The left is the official supplies, the right is the domestic supplies, practicality is similar. However, domestic consumables are even whiter. You may think that you can't cut the small word into a small one, but leave it as long as the blank space on the right. In fact, although the print software can manually set the length of the print, the minimum is 25mm, otherwise the printed item will be It sticks in the cutter, and the software can center it. In the beginning, I thought that the display of 5 words in 24mm was small enough, but the result with 18mm could actually be smaller.
The above is the comparison of the two consumables on the desktop and the card, and everyone can feel how much consumables are coming. In fact, I feel that 24mm consumables are a bit wide. My 18mm is not too narrow. The labels used to make machines, cables, and bottles are all relatively wide.
Finally, download the address:
User manual in Chinese:
Chinese driver
Chinese editing software (5.1)