Model NO.: WL
Trademark: KASAN. OEM
Specification: ce
Origin: Zhejiang China
Model NO.: WL
Trademark: KASAN. OEM
Specification: ce
Origin: Zhejiang China
1.Specification
1).Double-circuit type of limit switch,is widely used
2).With strong aluminum cast outer shell
3).High mechanical strength
4).Structure preventing oil,water and pressure
5).Indicating plate with setting position is installed in it,so it is easy to maintain
6).Vatious of actuators is taken convenience for using
7).Built-in contact stand has double-spring,so it has long mechanical life
|
Rated voltage |
Nonidctive load (A) | inductive Load (A) | ||||||
| Resistance Load | Lamp Load | Inductive Load | Motor Load | |||||
| NC | NO | NC | NO | NC | NO | NC | NO | |
|
125VAC 250VAC 480VAC 600VAC |
10 5 3 1 |
3 2 1.5 1 |
1.5 1 0.8 0.5 |
10 5 3 1.5 |
5 3 1.5 1 |
2.0 1.0 0.8 0.5 |
||
| 8VDC 14VDC 30VDC 125VDC 250VDC |
10 10 6 0.8 0.4 |
6 6 4 0.2 0.1 |
3 3 3 0.2 0.1 |
10 10 6 0.8 0.4 |
6 6 4 0.2 0.1 |
|||
 NOTES:
1.Inductive load has a power factor of 0.4 min.(AC) and a time constant of 7 msec.max.(DC).
2.Lamp load has an inrush current of 10 times the steady-state current,while motor load has an inrush current of 6 times the steady-state current.
Characteristic
|
Operation spead |
1mm-2m/s |
| Operating frequency | Mechanical:120 operations/minute Electical:30 operations/minute |
| Contact resistance | 15mΩ max. (inital value) |
| Insulation resistance | 100mΩ min.  (below 500VDC) |
| Dielectric strength | 1000VAC,50/60 Hz for 1 minute between terminals of the same polarity |
| 1,500VAC,50/60 Hz for 1 minute between current-carrying and non-current-carrying metal parts | |
| 1,500VAC,50/60 Hz for 1 minute between each terminal and ground | |
| Vibration | 10-55Hz,1.5mm double amplitude |
| Shock | Mechanical durable:1,000m/Sec²(about 100G'S) Malfunction:300m/Sec²(about 30G'S) |
| Ambient temperature | Use: -10 to +80 °C |
| Humidity | <95% RH |
| Life | Mechanical:15,000,000 operations above(under rated OT) Electrical:500,000 operations above |
| Weight | (CWLCA2-2) Above 275g |
| Degree of protection | IEC specification:IP66 |
|
Models |
CWLCA2-2 | CWLD2 | CWLNJ | CWJNJ-S2 | CWJCA12-2-Q | CWLCL | CWLCA32-41 | CWLD | CWLNJ-2 | CWLNJ-30 | CWLD1 | CWLD3 |
| OF(Max.) | 1360g | 2720g | 150g | 29g | 1360g | 142g | 1200g | 2720g | 120g | 80g | 2720g | 2720g |
| RF(Min.) | 227g | 910g | - | - | 227g | 28g | - | 910g | - | - | 910g | 910g |
| PT(Max.) | 20° | 1.7mm | 28mm | 28mm | 20° | 20° | 55° | 1.7mm | 28mm | 28mm | 1.7mm | 1.7mm |
| OT(Min.) | 30° | 5.6mm | - | - | 30° | 30° | 35° | 6.4mm | - | - | 5.6mm | 5.6mm |
| MD(Max.) | 12° | 1mm | - | - | 12° | 12° | - | 1mm | - | - | 1mm | 1mm |
| TF(Max.) | 2720g | - | - | - | 2720g | 2720g | - | - | - | - | 2720g | 2720g |
| TT(Min.) | 50° | 6.5±0.8mm | - | - | 50° | 50° | OP:90±10° | OP:34±2.8mm | - | - | 6.5±0.8mm | 9±0.8mm |
Model
|
CWLCA2 |
TZ-5104 (WLCA2) |
| CWLCA2-2 | TZ-5104-2 (WLCA2-2) |
| CWLCA12 | TZ-5108 (WLCA12) |
| CWLCA12-2-Q | TZ-5108-2 (WLCA12-2) |
| CWLCA32-41 | TZ-5105 (WLCA32-41) |
| CWLCL | TZ-5107 (WLCL) |
| CWLCL-2N | TZ-5107-2 (WLCL-2N) |
| CWLD | TZ-5101 (WLD) |
| CWLD1 | TZ-5103 (WLD1) |
| CWLD2 | TZ-5102 (WLD2) |
| CWLD3 | TZ-5109 (WLD3) |
| CWLNJ | TZ-5106 (WLNJ) |
| CWLNJ-30 | TZ-5168 (WLNJ-30) |
| CWLNJ-2 | TZ-5166 (WLNJ-2) |
| CWLNJ-S2 | TZ-5169 (WLNJ-S2) |
1.Specification
1).Double-circuit type of limit switch,is widely used
2).With strong aluminum cast outer shell
3).High mechanical strength
4).Structure preventing oil,water and pressure
5).Indicating plate with setting position is installed in it,so it is easy to maintain
6).Vatious of actuators is taken convenience for using
7).Built-in contact stand has double-spring,so it has long mechanical life
|
Rated voltage |
Nonidctive load (A) | inductive Load (A) | ||||||
| Resistance Load | Lamp Load | Inductive Load | Motor Load | |||||
| NC | NO | NC | NO | NC | NO | NC | NO | |
|
125VAC 250VAC 480VAC 600VAC |
10 5 3 1 |
3 2 1.5 1 |
1.5 1 0.8 0.5 |
10 5 3 1.5 |
5 3 1.5 1 |
2.0 1.0 0.8 0.5 |
||
| 8VDC 14VDC 30VDC 125VDC 250VDC |
10 10 6 0.8 0.4 |
6 6 4 0.2 0.1 |
3 3 3 0.2 0.1 |
10 10 6 0.8 0.4 |
6 6 4 0.2 0.1 |
|||
 NOTES:
1.Inductive load has a power factor of 0.4 min.(AC) and a time constant of 7 msec.max.(DC).
2.Lamp load has an inrush current of 10 times the steady-state current,while motor load has an inrush current of 6 times the steady-state current.
Characteristic
|
Operation spead |
1mm-2m/s |
| Operating frequency | Mechanical:120 operations/minute Electical:30 operations/minute |
| Contact resistance | 15mΩ max. (inital value) |
| Insulation resistance | 100mΩ min.  (below 500VDC) |
| Dielectric strength | 1000VAC,50/60 Hz for 1 minute between terminals of the same polarity |
| 1,500VAC,50/60 Hz for 1 minute between current-carrying and non-current-carrying metal parts | |
| 1,500VAC,50/60 Hz for 1 minute between each terminal and ground | |
| Vibration | 10-55Hz,1.5mm double amplitude |
| Shock | Mechanical durable:1,000m/Sec²(about 100G'S) Malfunction:300m/Sec²(about 30G'S) |
| Ambient temperature | Use: -10 to +80 °C |
| Humidity | <95% RH |
| Life | Mechanical:15,000,000 operations above(under rated OT) Electrical:500,000 operations above |
| Weight | (CWLCA2-2) Above 275g |
| Degree of protection | IEC specification:IP66 |
|
Models |
CWLCA2-2 | CWLD2 | CWLNJ | CWJNJ-S2 | CWJCA12-2-Q | CWLCL | CWLCA32-41 | CWLD | CWLNJ-2 | CWLNJ-30 | CWLD1 | CWLD3 |
| OF(Max.) | 1360g | 2720g | 150g | 29g | 1360g | 142g | 1200g | 2720g | 120g | 80g | 2720g | 2720g |
| RF(Min.) | 227g | 910g | - | - | 227g | 28g | - | 910g | - | - | 910g | 910g |
| PT(Max.) | 20° | 1.7mm | 28mm | 28mm | 20° | 20° | 55° | 1.7mm | 28mm | 28mm | 1.7mm | 1.7mm |
| OT(Min.) | 30° | 5.6mm | - | - | 30° | 30° | 35° | 6.4mm | - | - | 5.6mm | 5.6mm |
| MD(Max.) | 12° | 1mm | - | - | 12° | 12° | - | 1mm | - | - | 1mm | 1mm |
| TF(Max.) | 2720g | - | - | - | 2720g | 2720g | - | - | - | - | 2720g | 2720g |
| TT(Min.) | 50° | 6.5±0.8mm | - | - | 50° | 50° | OP:90±10° | OP:34±2.8mm | - | - | 6.5±0.8mm | 9±0.8mm |
Model
|
CWLCA2 |
TZ-5104 (WLCA2) |
| CWLCA2-2 | TZ-5104-2 (WLCA2-2) |
| CWLCA12 | TZ-5108 (WLCA12) |
| CWLCA12-2-Q | TZ-5108-2 (WLCA12-2) |
| CWLCA32-41 | TZ-5105 (WLCA32-41) |
| CWLCL | TZ-5107 (WLCL) |
| CWLCL-2N | TZ-5107-2 (WLCL-2N) |
| CWLD | TZ-5101 (WLD) |
| CWLD1 | TZ-5103 (WLD1) |
| CWLD2 | TZ-5102 (WLD2) |
| CWLD3 | TZ-5109 (WLD3) |
| CWLNJ | TZ-5106 (WLNJ) |
| CWLNJ-30 | TZ-5168 (WLNJ-30) |
| CWLNJ-2 | TZ-5166 (WLNJ-2) |
| CWLNJ-S2 | TZ-5169 (WLNJ-S2) |
12v power supply is suitable for LED, Electronic cigarette, Tablet, Water purifier, Router, CCTV camera, LCD, Motor, Fan, Toys Medical machine, POS machine, Beauty & Health equipment, Humidifier, LED lights etc.
We can meet your specific requirement of the products, like label design. The plug type is US/UK/AU/EU. The material of this product is PC+ABS. All condition of our product is 100% brand new. You can send more details of this product, so that we can offer best service to you!
12V Power Supply,12V Pc Power Supply,12V Dc Power Supply ,12V Power Supply For Pc
Shenzhen Waweis Technology Co., Ltd. , https://www.szwaweischarger.com