ADLINK, the industry leader in embedded computer products and intelligent industry application platforms (ApplicaTIon Ready Intelligent Platforms), released the cPCI-3510 series, a 3U CompactPCI motherboard using the latest fourth-generation Intel® Core i7 processor. The cPCI-3510 series uses a quad-core Intel® Core i7-4700QE 2.4GHz processor, 8GB DDR3L-1600 ECC onboard memory, and 32GB SATA NAND flash memory, which complies with the MIL-STD-810G military standard and provides wide temperature operation and shockproof standards. Provide reliable solutions for military and transportation applications. The integrated HD 4600 or IrisTM Pro 5200 graphics engine makes the cPCI-3510 series also very suitable for video decoding applications.
ADLINK's cPCI-3510 series has a dual-mode DisplayPort and a DVI-I output port, which can support three independent displays. With the integrated dual-screen display module of XMC-G460, the cPCI-3510 series can support up to four independent displays The screen is especially suitable for the multi-screen needs of the military aerospace industry in disaster recovery work or military application command centers.
With the best thermal power design and ADLINK's patented Extreme Rugged ruggedized design, ADLINK's cPCI-3510 series can support wide temperature operation up to -40 ° C to 80 ° C without the need for pressurized airflow The scope is sufficient to meet the key mission challenges in various difficult environments.
ADLINK cPCI-3510 series uses Intel® vPro technology, iAMT 9.0 remote management technology and PICMG 2.9 IPMI system management functions to provide powerful system management capabilities, allowing users to remotely configure the system and monitor the control system status. Its remote diagnosis, remote maintenance and automatic alarm functions can save the time and money costs of system maintenance, and prevent serious system downtime in critical applications.
ADLINK's cPCI-3510 series can not only be used as a system slot motherboard, but can also run independently on peripheral slots. Through different vertical cards and the design of the rear wiring board, ADLINK cPCI-3510 series can provide a variety of rich I / O interfaces, including a DVI-I interface and two image output ports (DisplayPort / DVI / HDMI), 4 serial ports, 4 SATA ports, ㄧ USB 3.0 and 4 USB 2.0 ports, 6 high-speed network ports, PS / 2 KB / MS, audio ports, and 1 PMC / XMC expansion slot. At the same time, it supports TPM 1.2 trusted platform module to provide hardware-based data protection.
Isotropic magnets are magnets with a random direction of magnetization in the magnet.
Magnet powders for isotropic magnets contain crystals in one magnet particle with a direction of random magnetization, and cannot be made anisotropic magnets when a magnetic field is applied externally during molding. In the magnetization after molding, the magnetization of the same component as the direction of the magnetization field becomes strong for the magnetization in a random direction in the crystal. Therefore, the molded body, which is an aggregate of crystals, can be a magnet having a magnetic force in the direction of magnetization
Isotropic Ferrite Magnets Y10T,Disc Magnet,Motor Rotor Magnet,Multipole Ferrite Ring Magnet
HU NAN YUBANG MAGNETIC MATERIAL CO.,LTD , https://www.ybmagnet.com