Irobot intelligent robot - self-service repair

How to Maintain Battery Protection iRobot Battery Limited Warranty iRobot provides a limited warranty on battery replacement defects within 6 months from the date of purchase. Please note that the battery is a consumable item and its storage capacity will gradually decrease after a period of normal use. Battery Maintenance Tips As long as the maintenance is correct, the Roomba's rechargeable battery can continue to use many cleaning cycles without replacement. Here are some tips for extending the life of your Roomba battery. 1. Always use Roomba. 2. Clean the Roomba's brush every 1-3 cleaning cycles and empty the vacuum chamber. 3. Keep charging the Roomba when not in use. 4. Be sure to let the Roomba charge continuously until it is full. 5. Place the Roomba and Home Base on a flat, solid floor while the Roomba is charging. 6. Charge the Roomba in a cool, dry place. 7. If long-term storage is required, remove the fully charged NiMH battery from Roomba and store it in a cool, dry place. 8. For best performance, fully charge the Roomba's battery at least every six months.

Battery installation editor

Roomba® 500 Series 1. Remove the side brush and side brush of the Roomba. 2. Loosen the four screws shown below and remove the bottom cover of the Roomba. 3. Remove the Roomba's battery 4. Install the new Roomba's battery with the iRobot logo facing up. 5. Replace the bottom cover, side brush, and side brush screws of the Roomba. Roomba® 700 Series 1. Loosen the two screws shown below and remove the Batteryba's battery cover. 2. Remove the battery from Roomba. 3. Install the new Batteryba's battery with the iRobot logo facing up. 4. Replace the Roomba's battery cover and the two screws that secure the battery cover.

How to remove and install a new panel editor

1. Remove the Roomba bin. 2. Pull up the Roomba's panel from the trash can and remove it. There are several places on the panel that are fixed. 3. 700 Series: When installing the panel of Roomba, first insert the front of the panel into the slot, then insert the tab into the corresponding slot. 500/600 Series: When installing the panel of Roomba, first insert the front of the panel under the handle (if available) into the slot, then insert the tab into the corresponding slot. 4. Push the inside and outside of the Roomba panel down smoothly. 5. Reinsert the Roomba bin.

How to install a new cleaning head module editor

1. Remove the side of the Roomba 2. Remove the side brush of the Roomba. 3. Loosen the four screws shown below and remove the bottom cover of the Roomba. 4. Remove the four screws that secure the Roomba cleaning head module. 5. Remove the Roomba bin. 6. Remove the cleaning head module from Roomba. 7. Install the new cleaning head module for Roomba. 8. Reinstall the four screws that secure the new cleaning head module. 9. Reinstall the trash can. 10. Replace the bottom cover of the Roomba and the 4 screws that secure the bottom cover. 11. Replace the Roomba's side and side brush screws.

Regular Back Sticker

The texture of Regular Back Sticker attracts you in a unique and innovative way. The ultra-thin and breathable material does not affect the heat dissipation function of the device at all. The smooth feel and personalized patterns not only protect the phone from scratches, dust, impacts and fingerprints. Bring you a different experience.

The Back Film protects the back cover of the phone from unnecessary scratches and repels dust, while reducing the signs of daily wear and tear.

It has oleophobic and waterproof effects, which can prevent the adhesion of oil stains and fingerprints. Provide comprehensive protection and maintain a new state.

Using the Protective Film Cutting Machine, you can install the Back Film on different types of mobile phone back shells, including mobile phones, tablets and other electronic products. With just one click, the customization can be completed in 30 seconds.

If you want to know more about Regular Back Sticker products, please click the product details to view the parameters, models, pictures, prices and other information about Regular Back Sticker products.

Whether you are a group or an individual, we will try our best to provide you with accurate and comprehensive information about Regular Back Sticke!

Leather Back Sticker, Aurora Back Sticker, Back Skin Sticker, Brushed Metal Back Sticker, Mobile Phone Sticker, Back Sticker,Mobile Skin Sticker

Shenzhen Jianjiantong Technology Co., Ltd. , https://www.jjtbackskin.com