Mechanical properties of foam tensile test (Shanghai Xiangjie) - Huaqiang Electronic Network

Test - lowercase jpg
Kaixin micro test
Test probe P100-M3

Company Name: A Thermal Insulation Material Co., Ltd. Material Name: Foam Executive Standard: Custom Test Temperature: 25 ° C
Test humidity: 65%
Test speed: 5mm/min
Gauge: 40mm
Test method: tensile clamp: clamp fixture test equipment:

Shanghai Xiangjie Rally Machine


Test plan: 1. Prepare the sample according to the standard and make the gauge length to measure the sample size:
2. Hold the sample in the clamp of the tensile machine and set the speed of 5mm/min:
3. For deformation, the position is cleared and then run until the sample breaks:
4. Issue a test report:

Foam mechanical testing machine pull

Test report content: 1. Cross-sectional area 2. Tensile strength 3. Tensile strength 4. Elongation at break 5. Elongation after breakage foam tensile test report preview:

Semiconductor Fuse And Ferrite

Fuse refers to an electric appliance that, when the current exceeds the specified value, melts the fuse and disconnects the circuit with the heat generated by itself.When the current exceeds the specified value for a period of time, the fuse melts and disconnects the circuit with the heat generated by the fuse itself.A current protector made from this principle.The fuse is widely used in high and low voltage power distribution system and control system as well as power equipment.


Ferrite is a metal oxide with ferrous magnetism.As far as electrical properties are concerned, the resistivity of ferrite is much larger than that of single metal or alloy magnetic materials, and it has higher dielectric properties.Ferrite magnetic energy also shows high permeability at high frequencies.As a result, ferrite has become a non-metallic magnetic material widely used in the field of high frequency and weak current.Due to the low ferrite magnetic energy stored in the unit volume, saturated magnetic induction strength (Bs) and low (usually only pure iron 1/3 ~ 1/5), and thus limits its higher requirements in the low-frequency magnetic energy density in the field of high voltage and high power applications.


Semiconductor Fuse, Fuse Cutout, Protection Fuse, Square Fuse, Fuse Link, Ceramic Fuse, Fuse Box, Fuse Resistors

YANGZHOU POSITIONING TECH CO., LTD. , https://www.cnfudatech.com