According to the "Planning", by 2015, key equipment and important raw materials will be localized, and major technologies will make breakthroughs. High-end application products have reached the international advanced level, and the energy-saving effect is more obvious. The concentration of LED lighting energy-saving industry has gradually increased, the industrial agglomeration area has been basically established, and the competitiveness of a group of leading enterprises has been significantly enhanced. The R&D platform and standards, testing and certification systems have been further improved.
Among them, the output value of LED lighting energy-saving industry is growing at an average annual rate of about 30%, reaching 450 billion yuan in 2015 (including 180 billion yuan for LED lighting applications); the localization rate of LED chips is over 80%, and silicon-based LED chips have made important breakthroughs; MOCVD equipment and key raw materials have been localized, and the localization rate of testing equipment has reached more than 70%.
Chongqing Dongjin Senior Investment Consultant Guan Li said that for a long time, about 70% of the profits in the LED industry were concentrated on epitaxial materials and chip manufacturing, but the "Planning" was issued, and the previous government procurement list added LED lighting products for the first time. In a certain sense, it shows the country's determination to promote LED products. It also shows that the government's subsidies for the LED industry have begun to tilt from upstream to downstream, helping to revitalize the entire industry chain.
Liang Wanzhang, chief analyst of Hesheng Fortune, believes that for LED lighting companies in the middle and upper reaches of the industrial chain, the key now is whether they can survive short-term overcapacity and industry integration; for LED lighting companies that manufacture downstream terminals, Preemptive.
SSD 240GB 240 GB SMI2258XT TLC Hard Disk Solid State Drive
>High R/W Speed Supports
Max. read speed up to 560 MB/s
>3D NAND
Adopts 3D NAND flash to optimize capacity, performance and stability
>Shockproof
No mechanical structure Adopts electronic chips control High data security
>SATA 2.5-inch Interface
Note
Capacity: 1GB=1,000,000,000 bytes by IDEMA. Performance test is performed in a specific testing environment. Any change of computer system, operation system, hardware, software, or functions will influence the test result.
Interface: 2.5", SATA 3 6Gb/s(compatible with SATA2 , SATA1,to drop speed )
Performance in the specifications is tested based on CrystalDiskMark.
Power consumption may differ according to flash configuration and platform. Power consumptions are measured by using CrystalDiskMark 1000 MB to test sequential R/W 5 times.
The TBW value is calculated based on Workload of JEDC 218B/219A standard.
The MTBF value is calculated based on the functional failure rate of JEDC 218B/219A standard.
Solid State Disk,Solid State Drive,Solid State Hard Drive,Solid State External Hard Drive,SSD
MICROBITS TECHNOLOGY LIMITED , https://www.microbitstrade.com