Installation of lighting appliances - (17) PVC flame retardant wire and cable wiring

A plastic tube that prevents the burning of the installation of the smart appliance. Its specifications "the size of the pipe diameter, Ke 15, and so on.

The small-headed rough-lane head has a direct head with the PV flame-retardant wire tube.

Eight flame-retardant wire tubes are new types of wiring tubes that have been used in recent years and have been widely used in various buildings.

It is very easy to cut the PV flame-retardant wire tube. The thin wall only needs to be cut by an electrician knife, and it can be broken: the wall thickness can be broken by the steel box, which is very convenient.

Only the same specification can be used in the construction to realize the connection of the PV wire tube.

Qiao W uses a tube card and so on along the wall.

It can also be sprinkled into the wall and covered with dark.

Send it out.

The method of wearing the wire is the same as the steel pipe wiring. Because the crab inside the PV tube is smooth, threading is not difficult.

High Voltage Linear Power Supplies

HVLP series Linear High Voltage Power Supplies are High-voltage DC Power Supplies that achieve AC/DC conversion through power frequency transformers and transistor loop control. Compared with switching high voltage power supplies, linear high-voltage power supplies have higher stability, higher accuracy, and lower output ripple. And the most important, because of the use of the power frequency AC/DC conversion principle, the linear power supply has no high-frequency radiation interference, and it is especially suitable for use in places with restrictions on EMC and EMI.


High Voltage Linear Power Supplies


The HVLP series Linear Power Supplies have a wide range of output specifications, the output power ranges from 1KW to 400KW, and the output voltage can reach up to 50KVDC, and accept customization.

The whole series linear power supply adopts industrial-grade metal chassis, pure copper AC/DC multi-insulation high-voltage transformer with varnish treatment, high-reliability multi-transistor filter loop, ensuring the power supplies can run for a long time at full load with high stability, high accuracy, and ultra-low ripple electronic characteristics, equipped with a complete protection circuit, which can better ensure the reliability of the linear power supply itself and the safety of the customer's load.
The output voltage and current can be adjusted by the 10-turn potentiometer with scale and lock on the front, equipped with 4 1/2-digit high-resolution LED meters for output value reading, and RS communication interface can also be added for remote control and monitoring of linear power supplies.

This series of linear high voltage power supplies are mainly used for gas discharge, high-voltage electronic tubes, and can also be applied for other electronic components burn-in test.
Because the output this power supply has HV, the output MUST be connected to the chassis for fixed grounding to ensure the personal safety of the user.

High-voltage Linear Power Supplies,Linear High Voltage Power Supplies, HV Linear Power Supplies, Linear HV Power Supplies, Linear HVPS

Yangzhou IdealTek Electronics Co., Ltd. , https://www.idealtekpower.com