Tender No.: XTGP2009-51
Tendering Agent: Xingtai City Government Procurement Center Owner: Unlisted Application Deadline: 2009-11-19
Region: Hebei Industry: Electrical and Electronic Appliances
The Xingtai City Government Procurement Center is entrusted by the purchaser to openly purchase and purchase the required street lamp lamps and lamp arms. Welcome domestic manufacturers and sales agents with production capacity to participate in this bidding activity.
1. Bidding document number: XTGP2009-51.
2. Bidding content: street lamp and lamp arm
A, single light source lamps and arms arm: a total of 506 sets of single-source lamps, a total of 253 sets of arms with arms, parameter requirements see the tender documents.
B. Pan-light source lamps and lamp arms: Quantity: A total of 64 sets of flood-light lamps and a total of 16 sets of matching lamp arms. See the bidding documents for parameter requirements.
3. Qualification requirements: The bidder should have legal person status, the registered capital is more than 5 million yuan, and the manufacturer with the ability to produce street lamps and lamp arms. The agent should have the authorization of the factory and the manufacturer and sales agent with relevant qualification certificates. Business can participate.
4. The cost of the bidding documents: 200 yuan (RMB); the tenders will not be returned after being sold, and will not be mailed.
5. Time for receiving bidding documents: October 27 to November 4, 2009 (working days)
6. Fees for bidding documents: 200 yuan (RMB); not mailed.
7. Location of the bidding documents: Xingtai City Government Procurement Center (fourth floor of Xingtai City Finance Bureau)
8. Deadline for submission of bids: 09:00 am on November 19, 2009
9. Time and place for opening the bid: On the morning of November 19, 2009, in the conference room on the second floor of the Comprehensive Building of the Finance Bureau of Xingtai City (No. 281, Guo Shoujing North Road, Xingtai City).
10. Contact person: Yan Junming, Qi Kexue
11, telephone (fax), 0319-2166636
crawler tractors are versatile,domestic initiative and technology leading. Hydraulic controlled differential - brake turn to technology , 360 degree steering wheel control and spin turn are our company`s unique advantages. In addition, our products also have the superiorities of triangular track drive, low grounding pressure and better Paddy field performance. Our company has iron crawler tractor and Rubber Crawler Tractor, which two main products. Every products have different types. These products are of high efficiency, long operating life. and low fuel consumption. Our crawler tractors are easy switching between hydraulic infinitely variable speed and mechanical transmission.
|
Model |
NF-Y602 |
NF-Y702 |
NF-Y802 |
|
|
Size |
length×width×height(mm) |
2900×1360×1500 |
3430×1590×2300 |
|
|
Weight |
(Kg) |
1700 |
2200 |
|
|
Minimum Ground Clearance |
(mm) |
260 |
410 |
|
|
Engine
|
Model |
3G25TC |
YD4CZ70C1 |
YD4SZ80C1 |
|
Form |
Electronic injection.vertical.water-cooled.four-stroke |
|||
|
Rated power(kW) |
44.1 |
51.5 |
58.8 |
|
|
Fuel |
Diesel |
|||
|
Rated power(r/min) |
2400 |
|||
|
Starting method |
Electric start |
|||
|
Steering Brake System
|
Steerig system type |
Planetary differential steering |
||
|
Brake system type |
Wet friction steering |
|||
|
Drive Train |
Clutch type |
Single-chip single-acting |
||
|
|
Transmission type |
2(mechanical file)+2×2(hydraulic stepless speed change) |
||
|
|
Transmission shift model |
Gear shift |
||
|
Walking System |
Rack form |
Rigid frame type |
||
|
|
Track pitch section×number×width |
90×46×280 |
90×50×350 |
|
|
|
The theoretical speed of each file(km/h) |
Forward:mechanical block:4.86; 8.65 Hydraulic block:0-5.75; 0-10.24 |
||
|
|
|
Back:0-5.75;0-10.24 |
||
|
Working Device |
Lifter type |
Semi-split |
||
|
|
Tillage depth control |
Force adjustment |
||
|
|
PTO form |
Type1,non-independent |
||
|
|
Power output shaft speed(r/min) |
624/960 |
||
|
Model |
NF-702 |
NF-802 |
NF-902 |
|
|
Size |
length×width×height(mm) |
3690×1500×2400 |
3690×1650×2560 |
|
|
Weight |
(Kg) |
2255 |
2450 |
|
|
Minimum Ground Clearance |
(mm) |
395 |
420 |
|
|
Engine |
Model |
YD4CZ70C1 |
YD4EZ80C1 |
YD4EZ90C1 |
|
Form |
Electronic injection.vertical.water-cooled.four-stroke |
|||
|
Rated power(kW) |
51.5 |
58.8 |
66.2 |
|
|
Fuel |
Diesel |
|||
|
Rated power(r/min) |
2400 |
|||
|
Tarting method |
Electric start |
|||
|
Steering Brake System |
Steerig system type |
Planetary differential steering |
||
|
Brake system type |
Wet friction steering |
|||
|
Drive System |
Clutch type |
Single-chip single-acting |
||
|
Transmission type |
Eight forward speed+ reverse gear |
|||
|
Transmission shift model |
Gear shift |
|||
|
Walking System |
Rack form |
Rigid frame type |
||
|
Track pitch section×number×width |
90×51×400 |
90×56×400 |
||
|
The theoretical speed of each file(km/h) |
Ahead:1.22;1.80;2.92; 3.84;5.50;8.08;13.13;17.25 |
|||
|
Backward:0.97;1.43;2.32;3.04;4.36;6.41;10.42;13.68 |
||||
|
Working Device |
Lifter type |
Semi-split |
||
|
Tillage depth control |
Force adjustment |
|||
|
PTO form |
Type1,non-independent |
|||
|
Power output shaft speed(r/min) |
720/1000 |
|||
|
PTO shaft spline and the outer diameter mm |
8×38 |
|||
|
Model |
NF-Q502 |
NF-Q602 |
NF-Q702 |
NF-Q802 |
|
|
Size |
length×width×height(mm) |
3430×1590×2300 |
|||
|
Weight |
(Kg) |
1715 |
1890 |
1930 |
1990 |
|
Minimum Ground Clearance |
(mm) |
395 |
|||
|
Engine |
Model |
YD4C50V1 |
YD4JZ60C1 |
YD4CZ70C1 |
YD4SZ80C1 |
|
|
Form |
electronic injection.vertical.water-cooled.four-stroke |
|||
|
|
Rated power(kW) |
36.8 |
44.1 |
51.5 |
58.8 |
|
|
Fuel |
diesel |
|||
|
|
Rated speed(r/min) |
2400 |
|||
|
|
Starting method |
Electric start |
|||
|
Steering Brake System |
Steerig system type |
Tooth embedded clutch-braking |
|||
|
|
brake system type |
Wet friction type |
|||
|
Drive System |
clutch type |
Monolithic single-acting |
|||
|
|
transmission type |
Main transmission (hydraulic stepless speed + mechanical gear) +auxiliary transmission 2 files |
|||
|
|
transmission shift model |
Gear shift |
|||
|
Walking System |
rack form |
Rigid frame type |
|||
|
|
track pitch section×number×width |
90×46×350(with side teeth) |
90×50×350(with side teeth) |
||
|
|
the theoretical speed of each file(km/h) |
Hydraulic:high0-9.2;low0-6.2 |
|||
|
|
|
mechanical:8.2;5.3 |
|||
|
Working Device |
lifter type |
Semi-split type |
|||
|
|
tillage depth control |
Bit adjust(optional force adjust) |
|||
|
|
PTO form |
Type1, non-independent |
|||
|
|
power output shaft speed(r/min) |
620/960 |
|||
|
|
PTO shaft spline and the outer diameter mm |
8×38 |
|||
If you have any questions, please contact with us directly. Crawler tractors are produced
by our company with high quality and good appearance. Welcome you can visit our factory.for
inqury,Please send mail directly to us!
Rubber Crawler Tractor
Small Crawler Tractor,Rubber Crawler Tractor,Triangular Crawler Structure,Convenient Control Crawler Tractor
Hunan NongFu Machinery&Electronic.Co., Ltd. , http://www.nfagmachine.com