Audience friends, everyone monkeys!
It's another egg for me. After finishing the strange shape of the headset last time, I have been wondering what I should write about. So my Joy con began to disobey! ! !
The base is on the back of my Mac. Joy con will be out of control in the special position! ! ! ! ! ! Can't be happily haha.
So I started to go online to find Raiders!
Ok
Have to say that finding these things is still a little good science. . Yep
Then I was surprised to find that repairing this little thing was so simple and stunned
Attach a link (do not know if scientific assistance is needed
So I began to ponder myself for repair! ! First we need a box of screwdrivers! ! !
Inside this one
Then you can start dismantling joycon
The first is to loosen the four screws on the joycon surface. The four screws are the signs of a Mercedes. (You need to make up your own, so you need a special screwdriver. For example, the box above me
Open the back cover and note that there is a row of cables near the side of the small LR button. Do not tear it off.
It is also very careful not to remove the cables
Then loosen the lower left as shown in the figure (lower left left white foam below the middle and lower right Phillips screws 
Gently pry open, still connected with the cable do not pull
then. . . Launch the human killer! ! ! ! ! Bathing sponge! ! ! !
Cut into appropriate rectangles and cram into here
The last step is to just reverse all the steps back! ! ! !
Measured effect lever
I can't think of using such a simple method to repair a handle. It's really worry and effort. I'm going to take the rest of the sponge to take a bath.
I wish you all fled as soon as possible.
I. Basic overview
Definition: 2000W Portable Power Station is a portable energy storage power supply with built-in large-capacity lithium-ion battery and 2000 watt output power. It can provide stable power support for a variety of high-power electronic devices and small home appliances.
Application scenarios: Widely used in outdoor camping, self-driving Tours, field work, family emergency, medical rescue, photography, communication base stations and other scenarios.
Two, the main characteristics
High power output:
The rated output power reaches 2000W, which can easily drive high-power equipment, such as induction cookers, electric kettles, and small refrigerators.
Some products support peak power and may reach higher output power for a short period of time to meet instantaneous high power needs.
Large capacity battery:
It is usually equipped with a large-capacity lithium-ion battery pack that can store several kilowatt-hours (kWh) of power to ensure long-term power supply.
The battery pack uses a high-quality cell with a long cycle life and a high energy density.
Multi-interface design:
It provides a variety of output interfaces, including AC output, USB DC output, Type-C interface, car charging interface, etc., to meet the charging needs of different devices.
Multiple devices can be charged or powered at the same time.
Intelligent management system:
Some high-end models are equipped with intelligent management systems that can monitor the battery status, output power, remaining power and other information in real time.
Intelligent charge and discharge control is supported to improve efficiency and extend battery life.
Security protection mechanism:
Built-in multiple safety protection mechanisms, such as overvoltage protection, overcurrent protection, short circuit protection, temperature protection, etc.
The power supply is automatically cut off in case of an exception, ensuring the safety of users and devices.
Portability:
Despite the large power and capacity, the product design focuses on portability and is easy to carry to different scenarios.
Some products are equipped with handles or rollers for easy handling and movement.
3. Performance parameters
Output power: 2000W (rated), some products may support higher peak power.
Battery capacity: Depending on the model, it is usually in the range of several kilowatt-hours (kWh).
Charging mode: Support a variety of charging modes such as mains charging, vehicle charging and solar charging.
Interface configuration: including multiple AC output interface, USB DC output interface, Type-C interface, car charging interface, etc.
Weight and size: Depending on the specific model and design, but usually the weight is larger and requires a certain handling capacity.
2kw Solar energy system, 3.2V lifepo4 battery pack,2000W power inverter,200W solar panel,2kw Portable Power Station
Foshan Keylewatt Technology Co., LTD , https://www.keylewatt.com