Threading devices, FRP threaders (also known as FRP perforators, FRP pipe cutters, piercers, pipe cutters, cable pipe cutters, cable piercers) are excellent tools for pulling the guide ropes in pipes. The smooth, flexible surface allows the perforator to pass easily through narrow passages. The perforator consists of three parts: a copper core, a fiberglass reinforced layer, and a high-pressure low-density polyethylene protective layer (smooth, sturdy, resistant to harsh environments). The copper core conductor allows the stringers to be easily placed in different ways.
Rod diameter 11-18mm Rod length 100-500m Temperature range -40°C to +80°C Minimum bending radius 295mm Traction fracture tension 4.5T Line density 150g/m Wall threader for building construction leads, length 30m, 40m, 60m, 80m, The 120m threader is divided into a FRP threader and a vinyl threader. It is mainly used for drawing guide ropes, cables and wires in sewer pipes and wall pipes.
1. High tensile strength, strong bending performance, free shuttle in narrow pipes.
2. With a rust-proof traction head.
3. Strong anti-aging performance.
4. Simple maintenance
5. Equipped with mobile or portable bracket for easy movement.
Quality discrimination of FRP perforator: FRP perforator consists of fiber rod layer and ABS outer sheath. The quality depends mainly on the glass fiber layer. The glass fiber is divided into alkali-free fiber, medium alkali fiber, high alkali fiber and alkali-free fiber. The fiberglass fiber rod made of fiber is used to make the FRP perforator with strong toughness, large pulling force, not easy to break, and anti-aging. Our FRP perforator is made entirely of alkali-free fiber, and 100% guarantees the quality of the product.
Rod diameter classification φ4.5mm, φ6mm, φ9mm, φ10mm, φ11mm, φ12mm, φ13mm, φ14mm, φ15mm, φ16mm length range 10m-500m (can be customized according to customer requirements)
Bending radius 330mm
Fiber density 210kg/m
Breaking force 4200Kg
Applicable temperature range -40 ° C to +80 ° C
Bracket size classification (1300mm & TImes; 450mm & TImes; 1330mm) (1200mm & TImes; 420mm & TImes; 1220mm) (980mm × 350mm × 1000mm) (680mm × 240mm × 700mm) (420mm × 180mm × 400mm)
Illustration of the use of the threader1. Prepare plastic threader needlework
2, the threader has two heads, one head as shown below, is a flexible threading method, you can wear a needle fixed on the sewing machine, you can also wear the needle freely, there is a small hook in the green small fork.
3, the needle eye is placed on the small hook, then the thread is placed on the small hook, and the needle is successfully removed.
4, the other end is a semi-automatic threading method, I personally feel not very easy to use. Insert the needle in a small hole
5, click on the yellow, the plastic piece at my index finger, that is active. He linked a small hook. With one press, the little hook came out of the eye of the needle. The reason is the same.
6. Hang the thread on the small hook, release the index finger, and the hook automatically brings the thread into the eye of the needle.
7, take out the needle, congratulations, success.
Various Puffs Vape Pen,Puff Vape Pen,Disposable Vapes,Vape Fume 2500
Lensen Electronics Co., Ltd , https://www.lensenvape.com