The highly integrated modular MTS-6000A (V2) test platform is available at all stages of the fiber network lifecycle. It provides field service technicians with the best performance and multifaceted field upgradeability to date. The platform can be equipped with different options such as SATA hard drive, WiFi, Bluetooth, 3G 4G, LTE connectivity and VFL power meter headphones or other useful features.
About the optical time domain reflectometer mts6000 operation guide analysis1, first understand the main interface
2, the interface
3, the basic operation - choose OTDA
Enter system, select the corresponding function module, press the confirm button, it will turn yellow, gray is unchecked. If you do not choose the following prompt (the function is not selected or the required module is not loaded)
3, the basic operation - measurement settings
.Setup parameter selection principle (manual)
Wavelength—Select the appropriate test wavelength to ensure accurate measurements.
Pulse Width - Ability to see the full trace of the trace, try to choose a small pulse width
Range—Try to choose a length larger than the faulty cable. It is recommended to select a distance of 1.5-2 times for measurement.
Resolution—The setting of the sampling interval. The smaller the sampling interval, the higher the distance accuracy. Intensive sampling of the curve will also introduce more noise, image dynamic range. Generally choose automatic.
Average time (sampling time) - 0~180 seconds
Refractive Index—Select the appropriate refractive index according to the actual condition of the cable, otherwise it will affect the measurement accuracy.
4, advanced operation - network connection
Configure the IP address of the MTS6000.
Operation sequence: system-setting-Ethernet-dynamic (network open DHCP service) or manual setting
Ping MST6000 Ip address, whether the connection is established
Download or upload files - FTP
IE mode or FTP software can be
FTP://IP address. Will prompt for username and password
Compact, lightweight, modular and highly integrated platform
Multi-layer network solution that can be tested from the physical layer to the service layer
Options include field-upgradeable VFLs, power meters, headphones and video inspection microscopes
Provides more than 40 physical single-mode or multimode fiber test application modules
Multiple service capabilities for Ethernet and SONET/SDH testing
Highly modular, flat form factor with upgrade testing capabilities and interchangeable module carriers, application modules and platform options
Optical time domain reflectometer mts6000 application
Performs bidirectional OTDR and loss measurement
Executable 10 G, 10 GE and 40 G fiber dispersion testing (PMD/CD/AP)
Can be used as a spectrum analyzer for installing and maintaining CWDM/DWDM networks
10 GELAN- and WAN-PHY network tests for 850, 1310 and 1550 nm wavelengths
Scalable devices are best for performing field tests
FTTA Patch Cord,High Density Mpo Mtp Cabling,Pre Terminated Cable For Data Center
ShenZhen JunJin Technology Co.,Ltd , https://www.jjtcl.com