8 international lighting trends at the Frankfurt International Lighting Exhibition (Photos)


On April 6-11, 2008, the biennial Frankfurt International Lighting and Building Technology and Equipment Exhibition opened in Frankfurt, Germany. Aladdin Lighting Network reporters participated in the exhibition and brought back a series of pictures to learn about the lighting design and popular trends through the world's largest international lighting exhibition.

According to the Aladdin lighting network live experience and photo records, the lighting fixtures exhibited at the 2008 International Lighting and Building Technology and Equipment Exhibition in Frankfurt have the following eight trends:

1, color: the more natural, the more vivid, the more popular

The lighting fixtures exhibited at the 2008 International Lighting and Building Technology and Equipment Exhibition in Frankfurt - especially indoor lighting, are bright but not exaggerated, natural and not frivolous, and the authentic red, black and white colors An atmospheric orthodox color sense. This also implies a new season of lighting design, the color is more natural and authentic.

Brightly colored lamps at the 2008 International Lighting Fair in Frankfurt

2, material: metal and other modern materials are still popular

At the 2008 International Lighting and Building Technology and Equipment Exhibition in Frankfurt, metal lamps are still the mainstream: modern metal or distressed metal shades or brackets, adding to the modernity and reliability of the lamps, often in the details Reflecting the designer's careful handwriting, in 2008, the field of lighting design will be smooth.

The 2008 International Lighting Fair in Frankfurt reflects the modern metallic lighting

The 2008 International Lighting Fair in Frankfurt reflects the modern metallic wall lamp


1 2 3 4 Next Page

High Frequency Pcb


High frequency PCB can meet faster signal flow rates when a special signal requirement into electronic components and products. It offers frequency from 500MHz to 2GHz, making it suited for high speed designs, as well as radio frequency, microwave and mobile applications. This high transmission frequency could provide a faster signal flow rate which is necessary for electronic devices with high frequency like wireless network, satellite communication.

Depends on different parameters, high frequency signals are reflected on PCB design usually means the impedance varies with respect to the sending component. To prevent such capacitive effects and make sure all parameters exactly specified, special materials and high level process control are required

High frequency PCB features:
high frequencypcb
Dielectric constant ( DK ε,Er)value need to be small and stable, high DK may cause signal transmission delay.
Dissipation factor (DF, tgδ) value need to be small, as it will affect quality of signal transmission, smaller DF could make sure smaller signal wastage.
The thermal expansivity need to be the same with copper foil as possible. If they are different may cause copper foil separated when the changes of cold and heat happen.
Heat resisting property, impact endurance, chemistry resisting, peel off resisting need to be good.
Water absorptivity need to be low, high water absorptivity will affect DK & DF when in the wet environment.

Topscom support production of various high-frequency PCB from prototypes to production run in order to meet increasing demands of high-frequency PCB ,microwave PCB & RF PCB of our customers, include many of good performance high frequency PCB ,such as Rogers PCB, Ceramic PCB, Teflon PCB, Taconic PCB, Arlon PCB.



Material Dielectric Constant
RO4350B 3.48±0.05@10 GHz
RO4003C 3.38±@10 GHz
Ro3003 3.00±0.04@10 GHz
Ro3010 10.2±0.03@10 GHz
RT5880 2.20±0.02@10 GHz

Check our capabilities by viewing the table found below:


Feature Capability
Quality Grade Standard IPC 2
Number of Layers 2 - 24layers
Order Quantity 1pc - 10000+pcs
Build Time 2days - 5weeks
Material RO4003C, RO4350B, Ro3003, Ro3010, RT5880
PP Rogers 4450F, Domestic-(25FR), Domestic-(RF-27), Domestic-(6700)
Board Size Min 6mm x 6mm | Max 457mm x 610mm
Board Thickness 0.4mm - 5.0mm
Copper Weight(Finished) 0.5oz - 2.oz
Min Tracing/Spacing 3mil/3mil
Solder Mask Sides As per the file
Solder Mask Color Green, White, Blue, Black, Red, Yellow
Silkscreen Sides As per the file
Silkscreen Color White, Black, Yellow
Surface Finish Electroless nickel/immersion gold (ENIG) - RoHS 
Immersion silver - RoHS 
Immersion tin - RoHS 
Organic solderability preservatives - RoHS
Min Annular Ring 4mil
Min Drilling Hole Diameter 6mil
Impedance tolerance ±10%
Other Techniques Peelable solder mask 
Gold fingers 
Carbon oil 
Countersink holes

Discuss your High Frequency PCB Project Today



High Frequency Pcb

High Frequency Pcb,High Frequency Circuit Boards,Prototype High Frequency Pcb,Special Customized High Frequency Pcb

Topscom Technology Co., Ltd. , http://www.pcbassemblycn.com