Intro:Takfly MPO/MTP to LC SM/MM Fan-out/Breakout Harness cable ssembly is mainly used for 10G/40G/100G, The LC fanout cable with 2.0mm/3.0mm branch cable, the LC side could adopts uniboot/single boot Duplex LC or dual boot duplex LC connector. The Harness MPO/MTP cable supports polarity suport both type A and type B.
Parameter:Standard Insertion Loss:SM≤0.7dB;MM≤0.5dB; Low Insertion Loss: SM≤0.35dB;MM≤0.35dB; Return Loss (dB):SM≥60 (APC);:SM≥50 (PC);MM≥30 (PC)
Application:Data Center Infrastructure; High Density Fiber Cabling System; High integrated instrument and components; High Precision Communication Device
Product details:
MPO/MTP to LC SM/MM Fan-out/Breakout Harness cable assembly is mainly used for 10G/40G/100G, The LC fan-out cable with 2.0mm/3.0mm branch cable, the LC side could adopts uni-boot/single boot Duplex LC or dual boot duplex LC connector. The Harness MPO/MTP cable supports polarity support both type A and type B.
Features:
Fiber pre-position (AB/BA)
Compact size, easy to manage
LC/SC/ST/E2000 simplex/duplex connector available in single fiber connector interface
MPO/MTP connector with 12 or 24 fibers
Corning fiber available for selection
Rugged fan-out: Round fan-out cable jacket with 2.0mm diameter
Customized fan-out cable length to cater for different installation situations
Application:
Data Center Infrastructure
High Density Fiber Cabling System
High integrated instrument and components
High Precision Communication Device
MPO/MTP Connectors:
Â
Optical  Parameters | |||||
Insertion  Loss (dB) |
SM Standard |
SM Elite |
MM Standard |
MM Elite |
|
≤0.7 |
≤0.35 |
≤0.5 |
≤0.35 |
||
Return Loss  (dB) |
≥60(APC) |
≥50(PC) |
≥30 |
||
Durability   (dB) |
≤0.2   500 times mating |
||||
Tensile  Strength (kgf) |
10 |
||||
Working  Temperature (ºC) |
-40 ~ +85 |
||||
Measurement  Wavelength (nm) |
1310/1550 |
850 |
|||
Avg. Fiber  Height Error (nm) |
-300 |
+300 |
|||
Central  Concave  (nm) |
300 |
||||
LC Fiber Connector:
Fiber Mode |
Single Mode |
Multimode |
|
Connector  Polishing |
PC |
APC |
PC |
Insertion  Loss(dB) |
≤0.3 |
||
Return Loss  (dB) |
≥50 |
≥60 |
≥35 |
Repeatability   (dB) |
≤0.2   1000 times mating |
||
Working  Temperature (ºC) |
-40 ~ +85 |
||
Measurement  Wavelengths (nm) |
1310/1550 |
850 |
|
Â
Â
Why choose Takfly ?
Service:
1.Customer's logo: Acceptable
2.General inspection on fixing before packing
3.Third party inspection: Acceptable
Quality Control:
All products must go through five checks before manufacturing process
1.Material incoming inspection before production
2.Full check after every individual process finished
3.Full check after production half-done
4.Full check before packing
5.Spots check after production packed before shipping
Advantage:
1.15 years experience in manufacturing fiber optic products..
2.Availability of RÂ & DÂ with more than 10 engineers.
3.Available of design and making mold with special molding house.
4.High quality, attractive price and fast delivery(2-7days)
5.OEM, ODM customer designs are also welcomed
6.More than 200 worker
7.Excellent service
Delivery:
1.Packing: Plastic bag& carton, Neutral packing or as your required.
2.Sample time: 1-3 days after confirmation.
3.Order lead time: 2-7working days depend on quantity and products.
4.Shipping port: Shenzhen, HK or other ports as you required.
5.Shipping term: EXW or FOB
Shipping:
1.Once confirmed the order, and payment sent after finishing goods.
2.Goods will be sent within 7Â days with the fast, reasonable and efficient shipping mode such as DHL, EMS, UPS,FEDEX, TNT, etc.
3.Please make sure your postal address is correct. Any lost and mistakes because  of wrong address.
If any interested, more products specification as well as price, sample will be sent for your evaluation!
Â
Intro:Takfly MPO/MTP to LC SM/MM Fan-out/Breakout Harness cable ssembly is mainly used for 10G/40G/100G, The LC fanout cable with 2.0mm/3.0mm branch cable, the LC side could adopts uniboot/single boot Duplex LC or dual boot duplex LC connector. The Harness MPO/MTP cable supports polarity suport both type A and type B.
Parameter:Standard Insertion Loss:SM≤0.7dB;MM≤0.5dB; Low Insertion Loss: SM≤0.35dB;MM≤0.35dB; Return Loss (dB):SM≥60 (APC);:SM≥50 (PC);MM≥30 (PC)
Application:Data Center Infrastructure; High Density Fiber Cabling System; High integrated instrument and components; High Precision Communication Device
Product details:
MPO/MTP to LC SM/MM Fan-out/Breakout Harness cable assembly is mainly used for 10G/40G/100G, The LC fan-out cable with 2.0mm/3.0mm branch cable, the LC side could adopts uni-boot/single boot Duplex LC or dual boot duplex LC connector. The Harness MPO/MTP cable supports polarity support both type A and type B.
Features:
Fiber pre-position (AB/BA)
Compact size, easy to manage
LC/SC/ST/E2000 simplex/duplex connector available in single fiber connector interface
MPO/MTP connector with 12 or 24 fibers
Corning fiber available for selection
Rugged fan-out: Round fan-out cable jacket with 2.0mm diameter
Customized fan-out cable length to cater for different installation situations
Application:
Data Center Infrastructure
High Density Fiber Cabling System
High integrated instrument and components
High Precision Communication Device
MPO/MTP Connectors:
Â
Optical  Parameters | |||||
Insertion  Loss (dB) |
SM Standard |
SM Elite |
MM Standard |
MM Elite |
|
≤0.7 |
≤0.35 |
≤0.5 |
≤0.35 |
||
Return Loss  (dB) |
≥60(APC) |
≥50(PC) |
≥30 |
||
Durability   (dB) |
≤0.2   500 times mating |
||||
Tensile  Strength (kgf) |
10 |
||||
Working  Temperature (ºC) |
-40 ~ +85 |
||||
Measurement  Wavelength (nm) |
1310/1550 |
850 |
|||
Avg. Fiber  Height Error (nm) |
-300 |
+300 |
|||
Central  Concave  (nm) |
300 |
||||
LC Fiber Connector:
Fiber Mode |
Single Mode |
Multimode |
|
Connector  Polishing |
PC |
APC |
PC |
Insertion  Loss(dB) |
≤0.3 |
||
Return Loss  (dB) |
≥50 |
≥60 |
≥35 |
Repeatability   (dB) |
≤0.2   1000 times mating |
||
Working  Temperature (ºC) |
-40 ~ +85 |
||
Measurement  Wavelengths (nm) |
1310/1550 |
850 |
|
Â
Â
Why choose Takfly ?
Service:
1.Customer's logo: Acceptable
2.General inspection on fixing before packing
3.Third party inspection: Acceptable
Quality Control:
All products must go through five checks before manufacturing process
1.Material incoming inspection before production
2.Full check after every individual process finished
3.Full check after production half-done
4.Full check before packing
5.Spots check after production packed before shipping
Advantage:
1.15 years experience in manufacturing fiber optic products..
2.Availability of RÂ & DÂ with more than 10 engineers.
3.Available of design and making mold with special molding house.
4.High quality, attractive price and fast delivery(2-7days)
5.OEM, ODM customer designs are also welcomed
6.More than 200 worker
7.Excellent service
Delivery:
1.Packing: Plastic bag& carton, Neutral packing or as your required.
2.Sample time: 1-3 days after confirmation.
3.Order lead time: 2-7working days depend on quantity and products.
4.Shipping port: Shenzhen, HK or other ports as you required.
5.Shipping term: EXW or FOB
Shipping:
1.Once confirmed the order, and payment sent after finishing goods.
2.Goods will be sent within 7Â days with the fast, reasonable and efficient shipping mode such as DHL, EMS, UPS,FEDEX, TNT, etc.
3.Please make sure your postal address is correct. Any lost and mistakes because  of wrong address.
If any interested, more products specification as well as price, sample will be sent for your evaluation!
Â
Transformer Drying,Insulation Dry,Hot Air Non-Standard Oven
Shengman Drying Equipment Engineering Co., Ltd. , http://www.jsdryingequipment.com