Wireless Intelligent Magnetic Door Sensor Switch for Home Alarm System

Model NO.: NT-MC03
Working Frequency: 315MHz or 433.92MHz
Encoding Type: Fixed Code/Learning Code
Transmitting Distance: up to 100 Meters
Trademark: Newerton
Transport Package: Neutral Packing
Specification: CE
Origin: Shenzhen China
Model NO.: NT-MC03
Working Frequency: 315MHz or 433.92MHz
Encoding Type: Fixed Code/Learning Code
Transmitting Distance: up to 100 Meters
Trademark: Newerton
Transport Package: Neutral Packing
Specification: CE
Origin: Shenzhen China
Wireless Magnetic Door Alarm Sensor 

Tech Features:
Model No.: NT-MC03

Working Voltage DC12V
Operating Current 12MA
Quiescent current 5UA
Transmitting Frequency 315/433MHZ
Transmitting Distance 100M
  • Protect your doors, windows, sliding doors, sliding windows and cabinets, etc... 
  • Widely used in wireless home or business alarm system 
  • Static Current Consumption: ≤ 5 μA 
  • Emission Current: ≤ 15mA 
  • Operating Temperature: -10°C~50°C
  • Emission Distance: 100m (Open field) 
  • Decode: Fixed code by jumpers, learning code EV1527
  • Alarm time: 5 seconds 
  • LED Indication of alarm and low battery 
  • Built-in Battery: 23A-12V battery (included, useful life time 6-12 months) 
  • Size: 70mm x 40mm x 15mm (antenna not included) 
  • Emission Frequency: We can offer 315 MHz or 433 MHz, you can choose one. 
  • Oscillation resistor / Timing resistor : We can offer 1.2M, 1.5M, 1.8M, 2.2M, 3.3M or 4.7M, you can choose one

Installation:
Stick part A (magnetic bar) on the edge of a moveable door or window, and stick part B on the fixed doorframe or window frame.

Note: The distance of these two parts shall be less than 1-2 cm when the door or the window is closed.

Usages:

Pull out the antenna of the detector.
When the door or window is opened from the closed position, LED 1 will turn on red light for 5 seconds, the detector will be triggered and will send alarming signal to the main unit.
Indication of low battery: When the voltage of battery is less than 7.5V, LED 2 will straightly turn on red light. At this time, you must immediately change the battery.

Wireless Intelligent Magnetic Door Sensor Switch for Home Alarm System

Wireless Magnetic Door Alarm Sensor 

Tech Features:
Model No.: NT-MC03

Working Voltage DC12V
Operating Current 12MA
Quiescent current 5UA
Transmitting Frequency 315/433MHZ
Transmitting Distance 100M
  • Protect your doors, windows, sliding doors, sliding windows and cabinets, etc... 
  • Widely used in wireless home or business alarm system 
  • Static Current Consumption: ≤ 5 μA 
  • Emission Current: ≤ 15mA 
  • Operating Temperature: -10°C~50°C
  • Emission Distance: 100m (Open field) 
  • Decode: Fixed code by jumpers, learning code EV1527
  • Alarm time: 5 seconds 
  • LED Indication of alarm and low battery 
  • Built-in Battery: 23A-12V battery (included, useful life time 6-12 months) 
  • Size: 70mm x 40mm x 15mm (antenna not included) 
  • Emission Frequency: We can offer 315 MHz or 433 MHz, you can choose one. 
  • Oscillation resistor / Timing resistor : We can offer 1.2M, 1.5M, 1.8M, 2.2M, 3.3M or 4.7M, you can choose one

Installation:
Stick part A (magnetic bar) on the edge of a moveable door or window, and stick part B on the fixed doorframe or window frame.

Note: The distance of these two parts shall be less than 1-2 cm when the door or the window is closed.

Usages:

Pull out the antenna of the detector.
When the door or window is opened from the closed position, LED 1 will turn on red light for 5 seconds, the detector will be triggered and will send alarming signal to the main unit.
Indication of low battery: When the voltage of battery is less than 7.5V, LED 2 will straightly turn on red light. At this time, you must immediately change the battery.

Wireless Intelligent Magnetic Door Sensor Switch for Home Alarm System

High Performance Uhmwpe Rope

Uhmwpe Ropes,Static Rope,High Performance Uhmwpe Ropes

Outdoor Rope Winch Rope Co., Ltd. , http://www.nsoutdoorrope.com